Institution: Simple Pelage Hangers Made From Woods &adenosine monophosphate; 3d Written Parts

I was happening a missionary post to create a coat hanger for a rampart niche I birth in my house. I like working with wood, so initially I was inquiring the internet for "Wood coat hanger" but then ran into this cool video happening youtube that showed a coat hanger made of Sir Henry Wood and oblanceolate 3d printed parts, which really excited me!!
(This was the original picture that inspired me)

I don't have many woodworking tools (most importantly a table saw) so I didn't do it exactly similar in the TV. Also I wanted to try my own version.

I ended up doing something genuinely similar, and very simple to make. Trust this helps spread the inspiration :)

Supplies

  1. A some slabs of 10cm pine wood
  2. A woodwork router - If you're getting into woodworking or flatbottomed just serve something small once in a piece, you very should puzzle over a router. This is the most versatile tool for a woodsman.
  3. A power driver or pound bore - I attached this to a cement wall in my household so I old a makita forge drill.
  4. 3d printer - I written these happening a Prusa MINI, but basically some 3d printer wish do.

(Some of these links are affiliate links. It's just a convenient way of Maine getting a little back, without affecting you in any way.)

In addition, you'll obviously want some screws to attach to the wall and potentially some sandpaper to smooth the wood. I wanted the 'pure' natural look of the wood thusly I didn't cover it in any lacquer or oil, but you can if you want to protect the wood Oregon collapse IT a nice discolouration.

Whole step 1: Preparing the Ellen Price Wood

I competitive the length of the wood to facial expression well-behaved in the niche I was hanging it in. I was making 3 pieces, so 2 of them came out to glucinium 40cm long and the one midmost a little shorter. I definite on the length just with my eye.

I cut the wood with a jigsaw, but you can use a handsaw, circle saw, or anything other basically.

At present you need to make 2 grooves along the edges of the slab. This was the trickiest part for me, since I just never finished this kind of 'cut' in front. I Lententide a router from a friend for this, but after that decided immediately that I need to buy one myself. This is out and away the almost skilled tool you can get for woodworking projects.

The measurements of the wood - length, width, size of the grooves you make wholly don't matter that much, because you can adjust the plastic piece to fit your Natalie Wood slab. I didn't decide on exact measurements of the groove, I just made what looked good/reasonable, measured it, and then designed the matching constructive part in fusion360.

I don't suggest you trying to have the Same accurate size as I did, since you'Ra bound to be given into junior differences that will be hard to fit.

Using the router -

I chose a aligned router bit, cause I wanted to brand a square cut. I adjusted the routers sentry duty to make a point the depth of it will atomic number 4 consistent, and then started devising the groove with the router.

If this is the first off time you'rhenium using a router, so take information technology slow. Even out though pine wood is relatively soft, I went over the edge of the wood a couple of multiplication until i reached the guard i put in place. You assume't want to start out a lot of wood with all pass around. Doing so can damage your wood.

Unalterable training -

Now I drilled 3 elfin holes in the Grant Wood for where the screws will go. This is important for 2 reasons:

  1. To strike off the verbatim spots of the holes to drill in the wall for hanging.
  2. Qualification a small hole volition guide the screw in the compensate centering.

Step 2: Designing & Printing the Fictile Parts

Designing a piece like this in fusion360 should be within reason simple, but if you're not familiar with fusion360, then I really advise watching some of their online independent guides. Their more than enough for scheming a piece like this.

I started by sketching the visibility of the Natalie Wood spell I prepared in fusion. No postulate to routine this into a 3d model, since it's only for sketching around this.
Then I sketched the shape of the plastic that will wrap more or less the forest. The places that 'wrap' the would should have a small buffer, sol the fit won't be too tight. I added ~0.6mm happening for each one depart that wraps the wood, so it will slide on/off easily. I yearned-for to experience the ability to also change colours, or deepen the design in the future if I need to.

After sketching the visibility of the fictile, I extruded it by 2cm. Added some fillets and chamfers for rounding corners, and that's most it.

In one case through designing this in fusion360, I desired to test if the size was good before printing one, indeed I sliced the model in PrusaSlicer, and printed the first 2 layers. Then I had a thin piece the same size of the plastic hanger to turn back on my pick of Natalie Wood for size.
Once I knew the size was perfect, I printed a hardly a 'congested' plastic hangers.

Printed these completely on my Prusa MINI with black PLA. I secondhand 100% infill cause I yearned-for IT to be solid, to make sure it's strong enough to hold a perturbing cake or backpack I want to hang.

(If you're new to 3dprinting, I strongly recommend a Prusa MINII as a first entry level printer. If you'Ra looking something cheaper, then Ender3 are also good enough).

Step 3: Hanging on the Wall in

Hanging them on the wall in is in truth straight gardant. The only thing you might want to entertain before hand is how to make sure it's straight.

This is how I tackled this -

I made 3 holes to point the screws that bequeath hang the wood. I took the screws I volition hang up this with, and screwed them into the wood, so they would still out just a trifle from the back up of the wood.
Then I placed the wood on the wall where I wanted to hang it, set a flat on top of it to make a point it's uncurved, and then pressed it against the fence with my hands. Since the screws were projected the back, they made a small dent in the wall exactly where i needed to drill.
I in real time marked these small dents with a pencil thus I wouldn't lose their spot. Then drilled the holes, set in dowels (get my walls are practical, you might not need dowels) and screwed the wood on the wall.

Step 4: Placing the Plastic on and Hanging Your Coat :)

Finally I written few more hangers, and single-spaced them on the wood how I wanted to.

Hung my coats on IT, drank a beer, and enjoyed my work :)

Go for this helps you!

Be the First to Percentage

Recommendations

  • Anything Goes Contest 2022

    Anything Goes Contest 2022